To Next PageTo Next PageWhy does my Weathermatic ProLine 800 Controller say FREEZE?
If your Weathermatic SLW Controller's display shows 'FREEZE', it means the temperature is 37 degrees F or colder, which is why the watering cycle is paused.
What does SENS mean on my Weathermatic ProLine 800?
If the display on your Weathermatic Controller shows 'SENS', it means a sensor connected to the SEN terminals has been tripped, causing the watering cycle to pause.
What does Omit Time mean on my Weathermatic ProLine 800 Controller?
If the display on your Weathermatic Controller shows 'Omit Time', it means the cycle is paused for omit hours that have been set.
What does SOAK mean on my Weathermatic Controller?
If your Weathermatic Controller display reads 'SOAK', it signifies that a zone is currently waiting for its soak time to complete.
General| Model | ProLine 800 Series |
|---|---|
| Programs | 4 |
| Start Times per Program | 4 |
| Rain Sensor Input | Yes |
| Display | LCD |
| Zones | 8 |
| Stations | 8 |
| Output | 24VAC |
| Flow Sensor Input | Yes |
| Power Source | Transformer |
| Station Capacity | 8 |
