Need help?Do you have a question about the Weathermatic PROLINE PL800 and is the answer not in the manual?
General| Model | PROLINE PL800 |
|---|---|
| Programs | 4 |
| Display | LCD |
| Weather Sensor Compatibility | Yes |
| Rain Sensor Input | Yes |
| Enclosure Rating | NEMA 3R |
| Station Capacity | 8 stations |
| Battery Backup | Yes |
| Flow Sensor Input | Yes |
| Type | Modular Irrigation Controller |
Details controller's LCD display, Time of Day, Battery Strength, Fault Indicator, and Next Watering Day.
Introduces programming concepts and key buttons like NEXT, BACK, and Adjust Value.
Explains setting the controller's current time and date.
Details setting start times for watering programs A, B, C, and D.
Describes setting the duration for each zone's watering.
Explains selecting watering schedules: Days, Interval, or Odd/Even.
Describes setting periods to omit watering, e.g., municipal restrictions.
Covers adjusting watering times monthly for seasonal climate changes.
Allows manual watering of a single zone for a specified time.
Tests zones for open circuits or shorts and detects faults.
Allows manual initiation of any programmed watering sequence.
Checks voltage and milli-amp outputs for system diagnostics.
Helps locate buried valves by creating an audible 'chatter'.
Explains omitting zones from sensor shutdown and setting delays.
Breaks up long run times to prevent watering runoff.
Identifies system problems requiring attention or repair.
Allows global suspension of watering for a selected number of days.
Manages automatic adjustment for Daylight Saving Time (DST).
Indicates which zones use the master valve/pump start output.
Sets up a temporary grow-in watering program that expires automatically.
Clears all programming data and resets settings to factory defaults.
Explains how watering cycles pause due to sensor readings or program settings.
Provides common problems, causes, and solutions for controller operation.
To Next Page
