Why does my Weathermatic PROLINE PL1600 say FREEZE?
If your Weathermatic SLW Controller's display shows 'FREEZE', it means the temperature is 37 degrees F or colder, which is why the watering cycle is paused.
What does SENS mean on my Weathermatic PROLINE PL1600?
If the display on your Weathermatic Controller shows 'SENS', it means a sensor connected to the SEN terminals has been tripped, causing the watering cycle to pause.
What does Omit Time mean on my Weathermatic PROLINE PL1600 Controller?
If the display on your Weathermatic Controller shows 'Omit Time', it means the cycle is paused for omit hours that have been set.
What does SOAK mean on my Weathermatic Controller?
If your Weathermatic Controller display reads 'SOAK', it signifies that a zone is currently waiting for its soak time to complete.
Instructions and warnings for the installer regarding safe setup and manual retention.
Details on setting run times for individual zones, including increments, range, and Program D usage.
Using the FAULT feature to diagnose and clear system errors and understand fault messages.
Configuring automatic adjustments for Daylight Saving Time schedules.
Defining which zones utilize the master valve or pump start output for system operation.
Creating temporary watering programs for new landscapes that automatically expire.
Suspending watering operations globally for a specified number of days due to rain.
Steps to perform a total reset, clearing all data and restoring factory defaults.
A table listing common problems, their causes, and suggested solutions for system operation.
Continued guide for problems like zones not turning on, unexpected zone activation, and incorrect run times.
Further troubleshooting for zones not turning on due to OFF settings, SYSTEM OFF, or sensor activation.
Explains pauses in watering cycles indicated by LED colors and display messages.
General| Brand | Weathermatic |
|---|---|
| Model | PROLINE PL1600 |
| Category | Controller |
| Language | English |
To Next Page
