DBW 2010 / 2016 Use / version
31
2 Use / version
2.1. Use of the water heaters
Webasto DBW 2010 / 2016 water heaters are used in connection with
the vehicle’s own heating system
– to heat the passenger cabin,
– to defrost the vehicle windows and
– to preheat water-cooled engines.
The water heater operates independently of the engine and is connec-
ted to the cooling system, the fuel system and the electrical system of
the vehicle.
The heater is approved for heating the passenger cabin or the driver’s
cab, but not to heat a cargo space used to transport hazardous
substances.
2.2. Version
The water heaters are approved for use with “diesel” fuel.
The heat output is:
– DBW 2010 heater 11.6 kW (10,000 kcal/h)
– DBW 2016 heater 16.0 kW (13,800 kcal/h)
The heaters DBW 2010 are designed for 12 or 24 V.
The heaters DBW 2016 only for 24 V.
Depending on requirements and equipment, a nozzle block preheating
system may be fitted.
1303560C_DBW 2010 EA_degbfr.book Page 31 Tuesday, March 5, 2013 9:05 AM
To Next Page
Loading...
Need help?
General
