DVS 400 Fast Charging System Operation and Maintenance Manual
09190-W-03-01 Page 11 of 27 Webasto Charging Systems, Inc.
3.1 Options and Accessories
The following options and accessories are available through your authorized Industrial PosiCharge DVS 400 Fast
Charging System dealer. For any other replacement parts, contact customer service directly:
Battery Monitor and Identifiers (BMID)
Many different sizes and types of industrial battery packs may be charged with the DVS 400 Fast Charging System.
Choose the correct BMID for the nominal voltage of your pack.
24V BMID P/N 08660-W
36V – 48V BMID P/N 08661-W
72V – 80VBMID P/N 08662-W
Contact Customer Service for Dual SBX or Euro cable kits.
Thermistor Options
Choose the correct thermistor type for your battery. Submersible thermistors are designed for installation through
the battery case into the battery electrolyte of flooded battery cells. Exterior thermistors are designed to be glued
onto the exterior of sealed batteries. DO NOT submerge exterior thermistors into electrolyte, as thermistor corrosion
will result in erroneous readings.
Submersible (flooded battery) thermistor P/N 09525-xxx
Exterior (sealed battery) thermistor P/N 08664
Diagnostic Cable P/N 06969
4 System Installation
Refer to the DVS 400 Installation Manual that came with your system.
To Next Page
Loading...
