Initial start-up Thermo Top C / Thermo Top E
50
13 Initial start-up
NOTE:
The safety instructions in the operating and maintenance instructions
must be observed without fail.
The operating and maintenance instructions must be read through
without fail before starting the heater.
After installing the heater, the water circulation and fuel supply system
must be carefully bled, taking into account the directions of the vehicle
manufacturer.
All water and fuel connections must be checked for leaks and secure
attachment during a trial run of the heater. If the heater switches to fault
mode during operation, the fault must be located and remedied.
To Next Page
Loading...
