21
Clean/change air lter cartridge
Checking the battery / acid level
Unscrew the air lter cover (1).
Remove the air lter insert (1) from the air lter enclosure.
Clean air lter insert as specied by the engine manufacturer
if there is damage or if it is extremely dirty.
Battery acid is extremely caustic. Protect hands and eyes
with suitable protective goggles and gloves.
Remove the cover cap (1).
Check acid level. If insucient, ll to max. mark with distilled
water.
When removing the battery, start by disconnecting the
cable clamp from the negative pole.
Installation is performed in the reverse order of removal.
Pull the fuel line (2) o the fuel lter (1) on both sides.
Replace the lter with a new lter element.
Change the fuel lter
If lubricating oils and fuel come into contact with skin,
they can cause skin cancer. Upon contact with the
skin, clean aected skin with suitable cleaning agent
without delay.
1
1
1
2
1