EasyManua.ls Logo

Weber mt DVH 655 E-2 - Operating Fluid Specifications and Troubleshooting; Fluid Types and Capacities; Common Roller Faults and Solutions

Weber mt DVH 655 E-2
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
Operating uids and ll levels
Troubleshooting
Assembly Operating material
Summer Winter DVH
Quality 655 E-2
Engine
Engine oil SAE 10 W 40 1.5 l
(-10 ~ + 50 °C)
API - CD CE
or SHPD
or CCMC - D2 - D3 - PD1
Fuel tank
Diesel Diesel Winter diesel fuel
(from approx. -12 °C) *
5.0 l
Diesel in accordance with DIN 51601-DK
or BS2869-A1/A2
or ASTM D975-1D/2D
Hydraulic system Hydraulic uid (ISO) H-LP 68 12.0 l
Kinem. viscosity 68mm²/s (cSt) at +40°C
First lling:
Fuchs Renolin MR 68MC
Multigrade oil
Water tank Clean water 60.0 l
Lubricating points
High pressure grease (lithium saponied),
in accordance with DIN 51502 and 51825
KP2N-30, to 150°C
As necessary
Battery Distilled water As necessary
Fault Possible cause Remedy
Roller does not
start
Operating error
Execute the start process
as prescribed
Lack of fuel Check the fuel level
Fuel lter fouled Change the fuel lter
Air lter fouled Clean/change air lter
cartridge
Battery defective Charge/replace battery
Fuse defective Changing the fuse
Roller does not
move
Operating error Repeat movement
attempt
Hydraulic pump is no
longer working
Check the V-belt for the
hydraulic pump; replace if
necessary