20
Changing the engine oil lter
Completely drain the engine oil as previously described.
Remove the cover cap (1).
Replace oil lter (1) with a new element.
After replacing the lter element, seal the lter enclosure with
the cover cap.
Change engine oil
Remove the cover cap (1).
Screw the oil drain pipe (1) onto the engine drain valve and
drain o the oil.
After emptying completely, unscrew the oil drain pipe from the
drain valve and ll with oil in accordance with the specication.
When working in the area of the engine compartment there
is a danger of being burnt!
Maintenance work
Danger of scalding due to hot oil.
When working in the area of the engine compartment there
is a danger of being burnt!
Danger of scalding due to hot oil.
Only drain engine oil when at operating temperature.
Use an oil dip stick (1) to check the oil quantity.
1
1
1
1
To Next Page
Loading...