EasyManua.ls Logo

Weber mt DVH 655 E-2 - Inspection, Cleaning, Disposal, and Safety Symbols; Inspection and Cleaning Procedures; Environmental Disposal and Safety Pictograms

Weber mt DVH 655 E-2
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Warning against irritants or materials hazardous to health
Warning against a hazardous place
Warning against a suspended load
Wear ear protection
General regulation
Environmental protection
Important information for operating and maintenance personnel is marked by pictograms.
Hard hat
Safety shoes
Protective gloves
Inspection
Rollers must be inspected in accordance with the corresponding implementation conditions and
operating conditions, as needed; however an inspection to ensure operationally safe status must be
performed by an expert at least once a year. The results of the inspection must be recorded in writing
and must be stored at least until the next inspection.
Cleaning work
Prior to cleaning the roller with a high-pressure cleaner, protect all accessible energized switches,
cable connections, etc. against water penetration by masking them o󰀨.
Cleaning tasks should only be executed in areas that are suitable and have been approved for this
purpose (oil separator amongst others).
Disposal
All operating uids and auxiliary materials must be disposed of in an environmentally-compatible
manner in accordance with country-specic regulations.