To Next PageTo Next PageWhat to do if Weber GENESIS GOLD B A127.C burners do not light or have a small flickering flame?
The excess flow safety device may have activated. To reset it, turn all burner control knobs and the cylinder valve OFF. Disconnect the regulator from the cylinder. Turn burner control knobs to HIGH. Wait at least 1 minute. Turn burner control knobs OFF. Reconnect the regulator to the cylinder. Turn cylinder valve on slowly.
Why is the flame low when burner is on HIGH on my Weber GENESIS GOLD B A127.C Grill?
A low flame could be due to several reasons: the LP fuel might be low or empty (refill the LP cylinder), or the fuel hose could be bent or kinked (straighten the fuel hose). If the front burner lights with a match, check the Crossover Ignition System.
Why does the inside of my Weber GENESIS GOLD B A127.C lid appear to be peeling?
The lid is porcelain-on-steel, not paint, so it cannot peel. The 'peeling' you see is likely baked-on grease that has turned to carbon and is flaking off. Clean the lid thoroughly.
What to do if Weber GENESIS GOLD B A127.C burners burn with a yellow or orange flame?
Clean Weber Spider Stopper Guards.
General| Number of Burners | 3 |
|---|---|
| Cooking Area | 637 sq. in. |
| Fuel Type | Propane |
| Dimensions | 64" H x 60" W x 27" D |
| Ignition | Electronic |
| Type | Gas |
Guidelines for storing the Weber Gas Barbecue when not in use, including safety precautions.
Provides essential safety warnings and basic instructions for operating the barbecue outdoors.
Step-by-step guide for installing the slide-out bottom tray, catch pan holder, and catch pan.
Instructions for placing Flavorizer Bars and cooking grates into the cooking box for optimal cooking.
Guidance on how to position the warming rack in the rear slots of the cooking box.
Instructions for placing the bottom shelf between the frame connectors under the cooking box.
Steps for inserting the Warm-Up Basket into the lid of the barbecue.
Instructions for attaching the condiment basket to the front frame of the barbecue.
Steps to attach the left work surface using bolts and washers.
Procedure to verify that all burner valves are in the OFF position before connecting gas.
Recommendations and warnings for safely filling the LP cylinder, emphasizing professional filling.
Detailed instructions on how to connect the filled LP cylinder to the barbecue's gas system.
Steps for removing the control panel, typically for accessing components or during installation.
Method for checking all gas connections for leaks using a soap and water solution.
Steps for reattaching the control panel after completing gas leak checks.
Provides detailed instructions and safety warnings for lighting the barbecue burners.
Explains the function and operation of the crossover ignition system for lighting burners.
Steps for safely turning off the barbecue burners and gas supply.
Alternative method for lighting the barbecue burners using a match.
Guidelines for proper storage of the barbecue when not in use, including gas cylinder safety.
Instructions for cleaning various parts of the barbecue, including safety precautions.
Steps to safely detach the LP cylinder from the barbecue for refilling.
Instructions for safely connecting the refilled LP cylinder to the barbecue.
Essential safety advice for handling and transporting liquid propane gas cylinders.
Specifications and requirements for LP cylinders compatible with the Weber Gas Barbecue.
Procedures for regularly checking gas fittings for leaks to ensure safety.
Guidance on inspecting and cleaning the Weber Spider Stopper Guards to prevent obstructions.
Information on the purpose and inspection of Weber Spider Stopper Guards.
Description of the correct flame pattern for Weber Gas Barbecue burners.
Step-by-step instructions for cleaning the main burners of the barbecue.
