21
Troubleshooting
LIGHTED CONTROL KNOBS
SYMPTOM
• Control knobs do not turn on after pressing power button.
CAUSE SOLUTION
Batteries are old. Install new batteries. Refer to “Replacing Batteries
for the Lighted Control Knobs” on this page.
Replacing Batteries for the Lighted Control Knobs
Use alkaline batteries only. Do not mix old and new batteries or dierent types of batteries (standard, alkaline, or
rechargeable). If you do not plan to use the light for a month or more, remove the batteries.
1) Locate the battery housing on the inside of the cabinet on the bottom right side.
2) Turn battery housing counterclockwise to open (A).
3) Replace three D batteries (B).
To Next Page
Loading...
