T
tcalhounJul 26, 2025
What to do if my Weber SPIRIT 320 burners do not ignite?
- CCrystal PageJul 26, 2025
If your Weber Grill burners aren't igniting, or you notice a small flickering flame in the HI position, or the barbecue temperature only reaches 250° to 300° in the HI position, the excess flow safety device may have activated. To reset it, follow these steps: 1. Turn all burner control knobs and the cylinder valve off. 2. Disconnect the regulator from the cylinder. 3. Turn burner control knobs to HI. 4. Wait at least 1 minute. 5. Turn burner control knobs to OFF. 6. Reconnect the regulator to the cylinder. 7. Turn cylinder valve on slowly.