Weber Summit 470 User Manual

470
™
1
2
PARTS LIST •
Catch Pan Holder - 1
Disposable Drip Pan - 1
Catch Pan - 1
Cooking Grate - 2
Warming Rack - 1
Battery Housing - 1
Rotisserie Fork - 4
Rotisserie Spit - 1
Rotisserie Motor - 1
Slide-Out Drip Tray - 1
Flavorizer
®
Bar - 8
Smoker Bar - 1
Smoker Box - 1
Side Burner Table - 1
Side Table - 1
ASSEMBLY INSTRUCTIONS •
TOOLS NEEDED:
• Adjustdoors,ifnecessary
Removeprotectivefilmfromstainlesssteelsurface
beforeusinggrill.
m IMPORTANT:TOPROPERLYALIGNFRAMEAND
DOORS,ASSEMBLEGRILLONAFLATANDLEVEL
SURFACE.
56227 05/11/12
AU — AUSTRALIA
NZ — NEW ZEALAND
ZA — SOUTH AFRICA

Weber Summit 470 Specifications

General

Main Burners	4
Side Burner	Yes
Sear Station Burner	Yes
Smoker Box and Burner	Yes
Rotisserie Burner	Yes
Ignition System	Snap-Jet individual burner ignition system
Grates Material	Stainless steel
BTU-per-hour Input	48, 800
Dimensions - Lid Open	66" W x 30" D
Dimensions - Lid Closed	66"W
Fuel Type	Liquid Propane
Warming Rack Area	112 sq in

Summary

Assembly Instructions

Tools Needed for Assembly

Lists the specific tools required to assemble the Weber Summit 470 grill.

Initial Assembly Steps and Notes

Covers critical assembly advice, including surface preparation and component alignment.

Grill Hardware and Assembly Steps

Hardware Components

Details the various hardware pieces, such as bolts and screws, used in the assembly process.

Assembly Step 3: Frame and Doors

Instructions for assembling the grill frame and aligning doors.

Assembly Steps 4-7: Component Installation

Guidance on installing various components like batteries, rotisseries, and gas systems.

Assembly Steps 8-10: Features and Lighting

Instructions for assembling specific features like the handle light and its battery requirements.