Weber Summit S-470 User Manual (English)

Other manuals for Weber Summit S-470

Owner's Guide36 pages

Manual2 pages

Quick Start Guide2 pages

Questions and Answers:

R
Robert ReyesAug 22, 2025
Why does my Weber Summit S-470 Grill burner have a yellow flame and smell like gas?
- M
  michelleosbornAug 22, 2025
  A yellow or orange flame, along with a gas smell, indicates a potential issue. This could be due to a blockage in the holes. To resolve this, clean the spider/insect screens. Other solutions include straightening the fuel hose and cleaning the burners. Also, make sure to hold the control knob in for two seconds after snapping the igniter and seeing the orange flame from the burner lighting tube. If problems persist, manually light the burner.
E
emartinezAug 23, 2025
What to do if my Weber Summit S-470 is experiencing flare-ups?
- S
  Stephen MurphyAug 25, 2025
  If your Weber Grill is experiencing flare-ups, try the following: preheat the grill with all burners on HI for 10 to 15 minutes, clean the grill thoroughly, and ensure the slide-out grease tray is clean. Do not line the slide-out grease tray with aluminum foil.
N
Nicole GonzalezAug 25, 2025
What to do if Weber Grill burner won't light or flame is low?
- L
  Linda LambertAug 26, 2025
  If your Weber Grill burner won't light or the flame is low on HI, consider the following: * Check if the LP fuel is low or empty and refill the LP cylinder. * Ensure the fuel hose isn't bent or kinked; straighten it if necessary. * If the burner lights with a match, inspect the ignition system. * If you used the snap igniter multiple times, hold the control knob in for two seconds after seeing the orange flame from the burner lighting tube. * If the igniter isn't sparking, try manually lighting the burner.
F
fjonesAug 27, 2025
Why won't the burners light on my Weber Summit S-470 Grill, or why is the flame weak?
- A
  Ashlee McgeeAug 27, 2025
  If the burners on your Weber Grill do not light, have a small flickering flame in the HI position, or if the barbecue temperature only reaches 250° to 300° in the HI position, the excess flow safety device may have activated. To reset it, turn off all burner control knobs and the cylinder valve. Disconnect the regulator from the cylinder. Turn burner control knobs to HI and wait at least one minute. Then, turn the burner control knobs to OFF. Reconnect the regulator to the cylinder and slowly turn the cylinder valve on.
O
olopezAug 27, 2025
What to do if the burner on my Weber Grill won't light or has a low flame?
- E
  evansdebbieAug 27, 2025
  If the burner on your Weber Grill does not light or the flame is low in the HI position, first, check if the LP fuel is low or empty and refill the LP cylinder if needed. Next, inspect the fuel hose for any bends or kinks and straighten it. If the burner still doesn't light, try cleaning the burners. Also, make sure to hold the control knob in for two seconds after snapping the igniter and seeing the orange flame from the burner lighting tube.
P
Phillip ClaytonAug 28, 2025
What to do if Weber Summit S-470 Grill burner does not light?
- D
  dtaylorAug 29, 2025
  If your Weber Grill burner doesn't light, or the flame is low in the HI position, consider the following: * Refill the LP tank if the fuel is low or empty. * Straighten the fuel hose if it is bent or kinked. * Clean the burners. * When igniting, hold the control knob in for two seconds after seeing the orange flame from the burner lighting tube. * If the igniter doesn't work, try manually lighting the burner. Call Customer Service if needed.
S
smithcurtisAug 29, 2025
How to fix erratic burner flame on my Weber Grill?
- R
  riveralisaAug 30, 2025
  If the burner flame pattern on your Weber Grill is erratic, the flame is low when the burner is on HI, or the flames do not run the whole length of the burner tube, clean the burners.
A
Andrew BrownAug 31, 2025
Why does my Weber Grill have flare-ups?
- D
  Dustin DavisAug 31, 2025
  Flare-ups in your Weber Grill can occur for several reasons: * The grill may not be preheating correctly: Ensure all burners are on HI for 10 to 15 minutes during preheating. * The cooking grates and FLAVORIZER BARS may be heavily coated with burned-on grease: Clean them thoroughly. * The slide-out grease tray may be dirty, preventing grease from flowing into the catch pan: Clean the slide-out grease tray.
C
Christina WaltersSep 1, 2025
Why is the inside of my Weber Grill lid peeling?
- A
  Angela BakerSep 1, 2025
  The inside of your Weber Grill lid may appear to be peeling, but it is not paint. The lid is porcelain enamel or stainless steel. The peeling look is due to baked-on grease that has turned to carbon and is flaking off. This is not a defect. To resolve this, clean the lid thoroughly.
G
Garrett BarnettSep 2, 2025
Why does my Weber Summit S-470 Grill lose heat in cold weather?
- T
  Trevor BoydSep 2, 2025
  If your Weber Grill loses heat when cooking in cold weather (10°C/50°F or colder), it may be due to frost or ice on the outside of the LP cylinder. This indicates that the liquid propane is vaporizing too slowly to supply the burners. Turn off the burner control knobs and the LP cylinder, then replace it with a spare LP cylinder to resume cooking.

Weber Summit S-470 Specifications

General

Type	Barbecue
Heat source	Propane/butane
Total power	- W
Ignition system	Snap-Jet
Adjustable thermostat	Yes
Number of cooking zones	4 zone(s)
Form factor	Cart
Product color	Stainless steel
Top surface type	Grate
Built-in capability	No
Cooking surface shape	Rectangular
Cooking surface (W x D)	690 x 490 mm
LED indicators	Temperature
Number of wheels	4 wheel(s)
Sear station power	3000 W