Activating the LINK 640
You can use the LINK Toolkit app which will guide you through the activation process of your LINK 640 de-
vice.
Make sure you have the following:
•
The Contract Confirmation letter including the Activation Code.
•
A device with internet connection that is able to scan QR codes, has the LINK Toolkit app installed and
the necessary LINK Toolkit login credentials.
•
The QR code of the LINK 640 that you can find on the device label or on the addtional QR code label.
In addition to the LINK Toolkit app you can use an online installation tool to activate the LINK 640. To go
there please scan the QR code of the LINK 640 that you can find on the device label or on the additional la-
bels provided with the device. If login credentials are needed for the online activation tool, please contact
Webfleet Solutions or your fleet manager.
Note: If the LINK 640 QR code cannot be scanned, the LINK Toolkit app as well as the online installation
tool also support the activation of the LINK 640 using the device serial number and the device activation key
(DAK), which you can also find on the QR code labels.
16
To Next Page
Loading...
