What you need for the installation
Before starting the installation of your LINK 640, read the installation instructions and the safety notices and
warnings carefully and make sure you have the following:
•
The Contract Confirmation letter including the Activation Code.
•
A device with internet connection that is able to scan QR codes, has the LINK Toolkit app installed and
the necessary LINK Toolkit login credentials.
•
The QR code of the LINK 640 (on the device label or on the additional QR code label).
•
All parts contained in the box.
•
A connection to the vehicle’s power supply that is fused with max. 10 A.
•
A place with a clear view of the sky where you can move your vehicle to check GNSS reception.
* To check available LINK 640 accessories or device compatibility please visit https://www.webfleet.com/
products
6
To Next Page
Loading...
