Driver identification
You can identify yourself to the device using your personal RFID card.
Note: You can use any RFID card or tag, that supports protocols compliant to
ISO14443A, such as MIFARE Ultralight, MIFARE Classic, MIFARE SmartMX, MIFARE
DESFire, MIFARE Plus, etc.
When you are assigned to the device the trip information will be associated to you as
a driver. This information can be used for statistics, such as OptiDrive.
To identify yourself to the device, do the following:
1. In the main menu tap Driver.
The LED for the RFID card reader turns on.
2. If you are asked to un-assign the previous driver, tap Yes.
A confirmation screen will inform you that the driver has been un-assigned.
Now tap Driver in the main menu again.
3. Hold your personal RFID card onto the area of the RFID card reader while the LED
is on.
A confirmation screen will inform you that you are now assigned as a driver.
Note: Depending on the settings in WEBFLEET made for the device, your PRO 2020
might start beeping if the driver does not identify to the device within few seconds
after the ignition is turned on. The sound alert can be turned off by identifying a
driver to the device using the personal RFID card. As soon as a driver is assigned to
the device the sound alert will stop.
16
To Next Page
Loading...
