Report working time
About reporting working time
You can report the time that you start and finish work, as well as the time you spend
having breaks.
Note: In WEBFLEET, you can configure to have both report working time and
logbook or only one of them available on your PRO 2020.
How to report working time
To generate personalised work time reports, you need to identify yourself by holding
your RFID card on to the RFID card reader.
To report the times you spend working to WEBFLEET, do the following:
1. In the main menu tap Working times.
2. Tap the appropriate button to change your work status.
The LED for the RFID card reader turns on.
3. Hold your RFID card onto the RFID card reader, while the LED is on.
On the display you will shortly see a confirmation, which working time state you
have reported.
Working time buttons
Using the following buttons you can report your working hours.
Start or resume work
Take a break
Finish work
How to check your report working time status
You can check what working status you have reported last and for how long.
17
To Next Page
Loading...
