WEG CFW-11 - Page 76

Option Kits and Accessories
7-4
7
The code and model of each availabe accessory is presented in the table 7.2. The accessories can be ordered
separately and will be shippe in an individual package containing the components and the manual with detailed
instructions for the product installation, operation, and programming.
ATTENTION!
Only one module can be fitted at once in each slot (1, 2, 3, 4, or 5).
Table 7.2 - Accessory models
WEG Part
Number
Name Description Slot
Identification
Parameters
P0027 P0028
Control accessories for installation in the Slots 1, 2 and 3
11008162 IOA-01 IOA module: 1 voltage/current analog input (14 bits); 2 digital inputs; 2
voltage/current analog outputs (14 bits); 2 open-collector digital outputs.
1 FD-- ----
11008099 IOB-01 IOB module: 2 isolated analog inputs (voltage/current); 2 digital inputs; 2
isolated analog outputs (voltage/current) (the programming of the outputs
is identical as in the standard CFW-11); 2 open-collector digital outputs.
1 FA-- ----
11008100 ENC-01 5 to 12 Vdc incremental encoder module, 100 kHz, with an encoder
signal repeater.
2 --C2 ----
11008101 ENC-02 5 to 12 Vdc incremental encoder module, 100 kHz. 2 --C2 ----
11008102 RS485-01 RS-485 serial communication module (Modbus). 3 ---- CE--
11008103 RS232-01 RS-232C serial communication module (Modbus). 3 ---- CC--
11008104 RS232-02 RS-232C serial communication module with DIP-switches for
programming the microcontroller FLASH memory.
3 ---- CC--
11008105 CAN/RS485-01 CAN and RS-485 interface module (CANopen / DeviceNet / Modbus). 3 ---- CA--
11008106 CAN-01 CAN interface module (CANopen / DeviceNet). 3 ---- CD--
11008911 PLC11-01 PLC module. 1, 2 and 3 ---- --xx
(1)(3)
Anybus-CC accessories for installation in the Slot 4
11008107 PROFDP-05 ProfibusDP interface module. 4 ---- --xx
(2)(3)
11008158 DEVICENET-05 DeviceNet interface module. 4 ---- --xx
(2)(3)
10933688 ETHERNET/IP-05 Ethernet/IP interface module. 4 ---- --xx
(2)(3)
11008160 RS232-05 RS-232 (passive) interface module (Modbus). 4 ---- --xx
(2)(3)
11008161 RS485-05 RS-485 (passive) interface module (Modbus). 4 ---- --xx
(2)(3)
Flash Memory Module for installation in the Slot 5 – Factory Settings Included
11008912 MMF-01 FLASH memory module. 5 ---- --xx
(3)
Stand-alone keypad, blank cover, and frame for remote mounted keypad
11008913 HMI-01 Stand-alone keypad.
(4)
HMI - -
11010521 RHMIF-01 Remote keypad frame kit (IP56). - - -
11010298 HMID-01 Blank cover for the keypad slot. HMI - -
Miscellaneous
10960842 KN1E-01 Nema1 kit for the frame size E models CFW11 0142 T 2, CFW11 0105 T 4
and CFW11 0142 T 4 (standard for N1 option).
(5)
- - -
10960850 KN1E-02 Nema1 kit for the frame size E models CFW11 0180 T 2, CFW11 0211 T 2,
CFW11 0180 T 4 and CFW11 0211 T 4 (standard for N1 option).
(5)
- - -
10960844 PCSE-01 Kit for power cables shielding - frame E (included in the standard product). - - -
10960847 CCS-01 Kit for control cables shielding (included in the standard product). - - -
10960846 CONRA-01 Control rack (containing the CC11 control board). - - -
(1) Refer to the PLC Module Manual.
(2) Refer to the Anybus-CC Communication Manual.
(3) Refer to the Software Manual.
(4) Use DB-9 pin, male-to-female, straight-through cable (serial mouse extension type) for connecting the keypad to the inverter or Null-Modem
standard cable. Maximum cable length: 10 m (33 ft).
Examples:
- Mouse extension cable - 1.80 m (6 ft); Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m (17 ft); Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
(5) Refer to the section 8.4 for more details.