Need help?Do you have a question about the WEG SSW-06.0205 and is the answer not in the manual?
General| Model | SSW-06.0205 |
|---|---|
| Protection Class | IP20 |
| Control Voltage | 110-240 V AC |
| Frequency | 50/60 Hz |
| Protection Degree | IP20 |
| Bypass Contactor | Optional |
| Communication | RS485, Modbus |
Important information about safety procedures within this manual.
Safety information attached to the product itself, including symbols.
Procedures and recommendations for physical installation.
Guidelines for connecting power, control, and signal wires.
Overview of the keypad's display, LEDs, and keys.
Functions and operations that can be performed using the keypad.
Checks and preparation steps before powering up the soft-starter.
Initial power-up routine and essential parameter programming.
Step-by-step guide for voltage ramp start-up via keypad.
Parameters for motor and system protection settings.
Identifies faults, their causes, and reset methods.
Provides corrective actions for common operating problems.
To Next Page
