Need help?Do you have a question about the WEG SSW-03 Plus Series and is the answer not in the manual?
General| Brand | WEG |
|---|---|
| Model | SSW-03 Plus Series |
| Category | Controller |
| Language | English |
General safety notices for using the manual.
Safety notices related to the product itself.
Guidelines for physical installation, environment, location, IP20 kit, and delta connections.
Procedures for electrical connections, including power, grounding, signal, fans, and various operational modes.
Detailed description of the X2 connector for signal and control.
Steps to prepare for powering up the unit.
Procedure for powering up the Soft-Starter.
Steps for commissioning, including preparation, HMI, and terminal operations.
How to use the HMI-3P for operation, including HMI operation and display indications.
Process for changing parameters, including selection and changing steps.
Adjustable parameters for regulating operation.
Parameters for configuring unit behavior.
Parameters related to motor characteristics.
Lists errors and their potential causes.
Application with 3-wire digital inputs, isolation, and motor delta connection.
Application with 3-wire digital inputs, bypass, and motor delta connection.
To Next Page
