Weider 2990 I - Page 8

8
4. Orient the Weight Selector (7) and the Plastic
Bushing (26) as shown.
S
lide the Plastic Bushing (26) onto the Weight
Selector (7). Align the hole in the Plastic
B
ushing with the top hole in the Weight
Selector.
Insert the Bushing Pin (28) into the Plastic
Bushing (26) and the Weight Selector (7).
Insert the Weight Selector (7) into the nine
Weights (15).
Apply some of the included grease to the indi-
cated holes in the Top Weight (16).
Slide the Top Weight (16) onto the Weight
Guides (4). Press the Top Weight downward
over the Weight Selector (7).
Insert the Weight Pin (18) into a Weight (15).
4
4
Grease
7
28
26
18
15
16