Weider Pro 220 Weight Bench Exerciser - Page 6

6
3
28
5
30
31
3
4
2. Attach the Crossbar (2) to an Upright (1) with two
M10 x 66mm Bolts (28), two Joint Plates (11),
and two M10 Nylon Locknuts (31).
Do not
tighten the Locknuts yet.
Repeat this step with the other Upright (1).
3. Attach the Front Leg (4) to the Bench Frame (3)
with an M10 x 66mm Bolt (28), an M10 x 19mm
Screw (5), an M10 Washers (30), and an M10
Nylon Locknut (31). Do not tighten the Locknut
or Screw yet.
2
28
11
11
2
1
31
1
4.
Attach the Bench Frame (3) to the Crossbar (2)
with two M10 x 68mm Bolts (27) and two M10
Nylon Locknuts (31).
3
2
31
27
4