18.Wettheendsofthe I.at Bar (31) withsoapy water.
Slide a Handgrip (18) onto each end of the Lat Bar.
CAUTION: Allow the Handgrips to dry before
using them.
Press 25mm Round Inner Caps (23) into the ends
of the Adjustment Weight Rests (54).
Press an Adapter Insert (57) into each end of the
Olympic Adapter (58).
18
57
_. 31_ _'18
18
19. Be sure that all parts have been tightened properly. The use of all remaining pads will be explained in
ADJUSTING THE WELDER PRO 635 beginning on page 12 of this manual.
11
To Next Page
Loading...
