WeighPack Systems PRIMO COMBI - LIABILITY DISCLAIMER; Revision Table

105
January, 2017
LIABILITY DISCLAIMER
All statements, technical information and recommendations contained in this manual or any other
information supplied by WeighPack in connection with the use, features and qualifications of the
WeighPack machine are based on tests believed to be reliable, but the accuracy or completeness thereof
is not guaranteed. Before using the WeighPack machine, the owner should determine the machine’s
suitability for its intended use based on the owner’s knowledge and the characteristics of materials
intended to be used with the machine. The Buyer bears all risk in connection with the use of the
WeighPack machine.
Since the use of this manual and the conditions or methods of installation, operation, use and
maintenance of the WeighPack machine is beyond the control of WeighPack, WeighPack does not
assume responsibility and expressly disclaims liability for loss, damage or expense, whether direct,
indirect, consequential or incidental, arising out of or anyway connected with such installation, operation,
use, or maintenance. Damage caused by neglect, misuse or failure to comply with this manual will
invalidate the warranty of the WeighPack equipment.
REVISION TABLE
DATE
REV
.
DESCRIPTION
November 25, 2011
2.0
General Revision
December 15, 2011
2.1
Maintenance Revision
January, 01, 2012
2.2
Maintenance Revision
March, 19, 2012
2.3
Cleaning Procedure
April 11, 2012
2.4
Multiproduct Revision
May 07, 2012
2.5
Cleaning Procedure
May 31, 2012
2.6
General Revision
June 06, 2012
2.7
Cleaning Procedure
August 09, 2013
2.8
Air Regulator and Shut Off Valve, Name Changed to
“PrimoCombi”, Updated Format
April 10, 2014
3.0
Separated Manual into Mech and H.M.I. Manuals, Changed
Washdown Procedure
September 21, 2015
4.0
General Revision
January 16, 2017
5.0
Updated Mechanical Section, updated Maintenance Section,
integrated H.M.I back into Manual and updated H.M.I. section with
new information. H.M.I. Version 1.9.0.0.