Need help?Do you have a question about the WEIHONG PM53C and is the answer not in the manual?
General| Brand | WEIHONG |
|---|---|
| Model | PM53C |
| Input Voltage | 220V AC |
| Output Voltage | 24V DC |
| Output Current | 5A |
| Power | 120W |
| Cooling Method | Natural cooling |
| Category | Control System |
| Protection | Overload, Short Circuit |
| Dimensions | 50mm |
Step-by-step guide for software and card installation.
Procedure for updating the CNC adapter driver.
Wiring diagram for the EX23A terminal board.
Wiring diagram for the 6B-EX4A terminal board.
Connections to stepping drivers (COM port and differential types).
Connections to various servo drivers (WISE, YASKAWA).
Wiring for DELTA ASDA_A/AB servo driver.
Wiring for PANASONIC MINAS_A5 servo driver.
Wiring for MITSUBISHI MR-E servo driver.
Wiring for FUJI FALDIC-ẞ servo driver.
Wiring for STONE GS servo driver.
Step-by-step process for machine tool and system debugging.
Method to check for pulse loss during operation.
To Next Page
