Specialized Concentrated Focused
「II」Preface
Revision History
You can refer to the following table for the revision records of each edition.
1) Contact information updated.
1) Wiring diagram updated in section 3.3, 3.4 and 3.5.
2) Detailed debugging step 2 and 5 updated in section 4.1.
3) Document style updated.
Including:
1) Manual hardware driver update in section 2.2;
2) Update MPG interfaces definition in section 3.2 ;
3) Update the wirings of terminals in section 3.4;
4) Machine debugging steps update in section 4 .
Precautions
Precautions can be divided into caution and warning according to the degree of possible loss or injury
in case of negligence or omission of precautions stipulated in this manual.
: general info, mainly for informing, such as supplementary instructions and
conditions to enable a function. In case of negligence or omission of this kind of precautions, you may
not activate a function. Note that in some circumstances, negligence or omission of even this kind of
precautions could cause physical injury or machine damage.
: warning info requiring special attention. In case of negligence or omission of
this kind of precautions, you may suffer physical injury, or even death, machine damage or other
losses.
1) Precautions Related to Storage and Transportation
The products should be transported properly in terms of the weight;
An excess of specified quantity of stacking products is prohibited;
Climbing, standing or placing heavy loads on the products is prohibited;
Dragging or carrying the products via cables or devices connected to them is prohibited;
To Next Page
Loading...
Need help?
General
