15
5.5 softSTART
The softSTART function is suitable for patients who nd a high pressure uncom-
fortable when awake and cannot fall asleep.
The softSTART button can be used to switch the softSTART function on or off.
The softSTART button displays the remaining runtime of the softSTART function.
If softSTART was activated during the last therapy, softSTART also starts auto-
matically when the next therapy begins.
If the softSTART button is not visible on the screen, the physician or authorized
dealer has not activated the function.
5.6 Energy saving
You can activate the "Energy saving" function in the main menu of your therapy
device. This function causes the device to switch off automatically if it has been
in "Standby" mode for 15 minutes.
There is also another option for saving energy: If you keep the on/off button
depressed for longer than 4 seconds, the device switches off completely.
To switch the device back on again, simply press the on/off button once.
Energy saving
softSTART key
(during the therapy)
The softSTART function must have been activated by the physician
or authorized dealer before you can use it. If this has not occurred,
the softSTART button will not be visible.
To Next Page
Loading...
Need help?
General
