Weinmann prismaAQUA - 3 Explanation of the Symbols and Displays on the Screen

8
Patient-related operating hours display
Displays the patient-related operating hours of the device for 30 seconds.
Start screen
3. Explanation of the symbols and displays on the screen
When you switch on your therapy device, a display appears on the screen for 30 seconds informing you of the patient-related operating hours of your device. If your
authorized dealer asks about the patient-related operating hours of your device, you can read these off conveniently during the rst 30 seconds after switching on the
device.
The screen then shows that the device is in "Standby" mode.