5
1. Preparing the therapy device
The therapy device must be connected to the power supply for use. The hose and mask must also be connected.
If you want to disconnect the therapy device from the power supply, press the clip on the
connector and pull the connector out. Do not pull on the power supply cable.
1.1 Connecting the therapy device up to the power supply
a. Insert the power supply cable of the power supply unit in the
power supply port on the rear of the therapy device (voltage
input). When doing so, please pay attention to the alignment of
the connector!
b. Now plug the other end of the power supply cable into the power
socket.
1.2 Connecting the respiration hose and mask
a. Attach the respiration hose to the device outlet on your therapy
device as shown below.
b. Now connect the respiration hose to the ventilation mask, e.g.,
the JOYCEone nasal mask, our comfortable ventilation mask,
which adjusts to suit almost every patient automatically.
To Next Page
Loading...
Need help?
General
