7
2. Using the SD card
The SD card is included in the scope of supply of your therapy device. The device saves the settings automatically as soon as the SD card is inserted.
In addition, you can also save your therapy data on the SD card and make them easily available to your physician or authorized dealer.
Inserting the SD card
a. Open the SD card slot cover.
b. Slide the SD card into the SD card slot until it clicks into place.
When doing so, note: The beveled corner of
the SD card must be at the top and facing
the device during insertion.
When the device is switched on, the
symbol appears in the status line
on the screen.
Removing the SD card
Requirement: The
symbol is no longer ashing.
a. Open the SD card slot cover.
b. Briey press in the SD card.
The SD card is ejected slightly.
c. Remove the SD card.
d. Label the SD card with your name and date of birth in order to
avoid confusion when it reaches the physician or authorized dealer.
e. Insert the SD card in
the protective wallet
included in the scope
of supply and send it.
The device saves the therapy data automatically when an SD
card is inserted.
To save the therapy data for a specic period manually,
please refer to the "Using the SD card" section of the
instructions for use.
To Next Page
Loading...
Need help?
General
