Installation- and operating manual Handling device HP140T R09-2011
38/52
Malfunctions
8.1 Safety when remedying malfunctions
8
8 Malfunctions
8.1 Safety when remedying malfunctions
8.2 Errors / Cause / Remedy
Please refer to the electrical and software documentation of the HP140T for infor-
mation on faults and errors, and troubleshooting.
8.3 Customer Service
Please provide the following details if you require the assistance of our Customer
Service:
• Serial number of the machine
• Description of the malfunction that has occurred
• Time and attendant circumstances of the malfunction that has occurred
• Assumed cause
You can contact our Customer Service from Monday to Friday between 08:00 and 17:00
at the
Service number +49 (0) 6281 - 5208-0
or at service@weiss-gmbh.de
An answering machine will provide you with information outside of the abovementioned
hours.
Injury of non-authorised personnel.
Malfunctions should only be remedied by instructed personnel provided by the operator
who have been trained in and are authorised to perform these tasks. The machine should
be deactivated with the main switches and secured against unintentional reactivation
prior to remedy. The radius of action of moving machine parts should be secured.
To Next Page
Loading...
Need help?
General
