Installation- and operating manual Handling device HP140T R09-2011
6/52
Introduction
1.5 EC Declaration
1
1.5 EC Declaration
An EC Declaration as specified by Directive 2006/42/EC (Machinery Directive) is
included with each machine at delivery.
The text of this EC Declaration is as follows:
WEISS GmbH
Siemensstrasse 17
D-74722 Buchen, Germany
Declaration of incorporation of partly completed machinery
in accordance with EC Machinery Directive 2006/42/EC, Annex II B
Prohibition of commissioning
We hereby declare that the machine called Handling device HP140T is intended for the
installation into another machine or is to be assembled with other machines to a machine
in terms of the directive 2006/42/EC.
Commissioning is prohibited until it has been established that the machine into which the
aforementioned product should be installed satisfies the provisions of the EC Machinery
Directive, and that a Declaration of Conformity in accordance with EC Machinery Direc-
tive 2006/42/EC, Annex II A has been issued.
1.6 System-dependant documentation
In addition to this manual, further documents are required to ensure safe operation of this
machine. The specifications stated in these documents are to be observed.
For control system by WEISS-GmbH:
• Electrical operating manual
• WAS.handling Windows program operating manual
WAS.indexer Profibus DP
WAS.indexer CAN
WAS.indexer Ethernet
WAS.indexer RS232
AsIMA
DeviceNet
• Operating manual Hand-held grease gun (for the model with lubricating nipples)
• Operating manual automatic lubrication pump (for model with automatic lubrication)
To Next Page
Loading...
Need help?
General
