Appendices
Custom setup
You can customize the scale to best suit your needs. Configurations that can be selected
include the automatic shut-off time, weighing units, beeper, and more.
Enter custom setup mode
1. Make sure that the scale is powered down.
2. Press and hold ZEROand REWEIGH while pressing the power button.
0000 is displayed.
3. Enter the PIN 9821 using the following keys:
• Press REWEIGH to adjust the selected value up or press RECALL to adjust the
selected value down.
• Press LB/KG to confirm the entry and move to the next value.
4. Once the correct PIN is entered, press LB/KG to enter the setup mode
The scale displays SEt-UP and produce a series of four long beeps.
Set the options
Enter the custom setup as described.
Press
LB/KG to scroll through the custom setup options.
The options displayed with each press are as follows:
Press REWEIGH to adjust these options up or press RECALL to adjust these options
down. Press LB/KG to accept the current value and move on.
Note Options indicated with an asterisk (*) require an additional
press of LB/KG to change the value.
Option displayed Feature
SOFt This option displays the software version of your scale.
dAtE This option displays the release date of the software. The format is MM.DD.YY.
SCALE This option displays the model number of the scale.
21
To Next Page
Loading...
