What does Err 10 mean on Welch Allyn Blood Pressure Monitor?
If your Welch Allyn device displays 'Err 10' and a continuous alarm sounds, it indicates a severe error caused by accumulated pressure outside the measurement process.
What does Code 2 mean on Welch Allyn ABPM 7100?
Try again. If the error persists, send the device to your Welch Allyn specialist for inspection.
What does Code 3 mean on Welch Allyn ABPM 7100?
Try again. If the error persists, send the device to your Welch Allyn specialist for inspection.
What does Code 5 mean on Welch Allyn ABPM 7100?
Try again. If the error persists, send the device to your Welch Allyn specialist for inspection.
What does Code 7 mean on Welch Allyn ABPM 7100?
Try again. If the error persists, contact your Welch Allyn specialist.
General| Device Type | Ambulatory Blood Pressure Monitor |
|---|---|
| Measurement Method | Oscillometric |
| Cuff Pressure Range | 0-300 mmHg |
| Memory | Up to 300 readings |
| Data Transfer | USB |
| Systolic Range | 60-270 mmHg |
| Mean Arterial Pressure Range | 40-200 mmHg |
| Pulse Rate Range | 40-200 bpm |
| Power Source | 2 AA batteries |
| Operating Conditions | 10 to 40 °C, 15 to 90% RH |
| Storage Conditions | 10 to 95% RH |
| Diastolic Range | 30 to 200 mmHg |
To Next Page
