Select a profile from the log in area
If your facility has configured the Connex Spot Monitors with a facility-specific format,
the Log in screen appears when the monitor is powered up.
1. Sign in to the monitor.
The Profile selection screen appears and displays up to three profiles.
2. Touch the desired profile.
The Home tab appears for the chosen profile.
If you change the profile while acquiring patient measurements or while unsaved patient
measurements are displayed, the measurements are deleted.
Change a profile
1. Touch the Settings tab.
2. Touch the Profiles vertical tab.
3. Touch the desired profile.
4. Touch the Home tab to navigate to the Home screen and to begin using the selected
profile.
Profiles cannot be changed while acquiring patient measurements or while unsaved
patient measurements are on the screen.
Common screen functionality
Many parameter areas on the screen allow you to enter data. Touch an icon to perform
the function noted.
Icon
Description
Numeric keypad for entering numeric information.
Alphanumeric keyboard for entering both alpha and
numeric information.
Shift key enters the next letter touched as uppercase.
Data field in which data is entered.
Back key to delete data starting at the right side of the
data being entered.
Next key captures the data entered, clears the data field,
and advances to the next data field for data entry.
36 Startup Connex
®
Spot Monitor
To Next Page
Loading...
