Welch Allyn Connex Spot Monitor Directions For Use

Cleaning agent Additional information
Accel INTERVention
Accel TB
CaviWipes
Clinell® Universal Wipes
Oxiver TB
Sani-Cloth
®
Plus
Super Sani-Cloth
®
70 percent isopropyl alcohol solution Applied to a clean cloth
Section 2. Not approved for all Connex Spot Monitor components
Note The following cleaning agents are NOT approved for cleaning Connex Spot
Monitors equipped with the Braun ThermoScan PRO 6000
Cleaning agent Additional information
Cleancide
Clorox HealthCare Bleach Germicidal Cleaner
Sani-Cloth
®
Bleach
Not approved for cleaning the display
Super HDQ
®
L10
Dilution rate of ½ oz per gallon of water (1:256) applied to a
clean cloth
Tuffie5 Cleaning Wipes
Virex II (256) Dilution rate of ½ oz per gallon of water (1:256) applied to a
clean cloth
10 percent bleach solution (.5% - 1% sodium hypochlorite) applied to a clean cloth
Remove liquid spills from the monitor
Liquids can damage electronics inside the monitor. Follow these steps if liquids spill on
the monitor.
1.
Power down the monitor.
2. Disconnect the power cord from the mains outlet and the power source.
3. Remove battery pack from the monitor.
4. Dry excess liquid from the monitor.
5. Reinstall battery pack.
6. Reconnect the power cord.
Directions for use Maintenance and service 85

Welch Allyn Connex Spot Monitor Specifications

General

Battery Life	Up to 8 hours
Display	7 inch color touchscreen
Connectivity	Bluetooth, USB
Power Source	AC power, Rechargeable battery
Measurements	Blood pressure, temperature, SpO2, pulse rate
SpO2 Technology	Masimo or Nellcor
Optional Features	Printer
Temperature Technology	SureTemp® Plus or Braun Thermoscan® Pro 6000