Directions for use Cordless illumination system 13
Appendix
Specifications
Item Specification
Auxiliary power cord transformer
Classification
Input
Output
Category
U.S. & Canada
International
Class I, type BF applied part Class II, type BF applied part
120 V ~ 60 Hz 90–264 VAC ~ 50–60 Hz, 200 mA
5 VDC, 300 mA 5 VDC, 300 mA
Not AP/APG equipment Not AP/APG equipment
Charging station transformer
Classification
Input
Output
Category
U.S. & Canada
International
Class I Class I, Class II
120 V ~ 60 Hz 230 V (240 V in Australia) ~ 50 Hz
9.8 VDC, 150 mA 7.5 – 9.2 VDC , 200 mA
Not AP/APG equipment Not AP/APG equipment
Power cord length
Auxiliary power cord
Charging station
305 cm (120 in)
92 cm (36 in)
Weight
Illuminator
Charging station (base and
power cord)
Auxiliary power cord
48 g (0.1 lb)
142 g (0.31 lb)
290 g (0.64 lb)
Battery cell
Capacity
Voltage
Chemistry
700 mAh
3.7 V
Li-ion (single lithium ion)
Protection against ingress of
water, per IEC 60529 (illuminator,
auxiliary power cord, charging
station)
IPXØ
Operating conditions
Temperature
Relative humidity
Altitude
+10° C to +35° C (+50° F to +95° F)
30% to 75% noncondensing
700 to 1060 hPa
To Next Page
Loading...
Need help?
General
