Welch Allyn Schiller AT-2plus - Spiro Settings, Calibration, and Mouthpiece Use

AT-2plus User Guide Spirometry Supplement Page 5
Art. No. 2. 510339wa ©1999
AT-2plus User Guide Spirometry Supplement Page 5
Art. No. 2. 510339wa ©1999
Procedure Overview
5. If using the option for the first time select the required spiro settings and Spiro Standard.
Press '0'
0
1mV
to display the Spiro settings - details of all spiro settings are given on the
following pages.
All these settings are stored when the unit is switched off.
6. Insert new disposable sensor (SP-250).
See page 42
WARNING
THE DISPOSABLE MOUTHPIECE IS DESIGNED FOR ONE-TIME USE TO ELIMINATE THE DANGER OF CROSS
CONTAMINATION - DO NOT USE THE MOUTHPIECE FOR MORE THAN ONE PATIENT.
7. Calibrate Unit (print calibration report) - Press key '8'
8
25
The unit must be calibrated
° At the beginning of each day
° If the sensor is changed
° When a significant temperature or pressure difference occurs
The calibration procedure is detailed on page 21.
Procedure Overview
5. If using the option for the first time select the required spiro settings and Spiro Standard.
Press '0'
0
1mV
to display the Spiro settings - details of all spiro settings are given on the
following pages.
All these settings are stored when the unit is switched off.
6. Insert new disposable sensor (SP-250).
See page 42
WARNING
THE DISPOSABLE MOUTHPIECE IS DESIGNED FOR ONE-TIME USE TO ELIMINATE THE DANGER OF CROSS
CONTAMINATION - DO NOT USE THE MOUTHPIECE FOR MORE THAN ONE PATIENT.
7. Calibrate Unit (print calibration report) - Press key '8'
8
25
The unit must be calibrated
° At the beginning of each day
° If the sensor is changed
° When a significant temperature or pressure difference occurs
The calibration procedure is detailed on page 21.