Welch Allyn Schiller AT-2plus - Spiro Settings; Spirometry Graph Printout Setup

AT-2plus User Guide Spirometry Supplement Page 16
AT-2plus Spirometry Supplement Page 16
Spiro Settings
This menu option defines all the general settings. Settings made here are remembered when the unit is switched off.
For normal use, the settings are made when the unit is first commissioned. However, the settings can be easily
changed at any time for comparison purposes or individual preference. The settings menu is as follows:
Printout Graph Setup - Spirometry
This defines the format and content of the printout when the PRINT key is pressed. The settings are as follows:
1st key 2nd key 3rd key 4th key 5th key 6 th key
ALT
0
1mV
0
1mV
0
1mV
1
'0' Time Scale 10mm/s
'1' Time Scale 20mm/s
'2' Flow graph on (printed)
'3' Flow graph off
'4' Volume graph on (printed)
'5' Volume graph off
'6' Curve Format Best
'7' Curve Format All
Spiro Settings
This menu option defines all the general settings. Settings made here are remembered when the unit is switched off.
For normal use, the settings are made when the unit is first commissioned. However, the settings can be easily
changed at any time for comparison purposes or individual preference. The settings menu is as follows:
Printout Graph Setup - Spirometry
This defines the format and content of the printout when the PRINT key is pressed. The settings are as follows:
1st key 2nd key 3rd key 4th key 5th key 6 th key
ALT
0
1mV
0
1mV
0
1mV
1
'0' Time Scale 10mm/s
'1' Time Scale 20mm/s
'2' Flow graph on (printed)
'3' Flow graph off
'4' Volume graph on (printed)
'5' Volume graph off
'6' Curve Format Best
'7' Curve Format All