Manual no. WDT90100 Page 51
CoolTig - 220
SECTION10WARRANTYPOLICY
Malo Welding Products Ltd., Warranty Policy
Effective August 1
st
, 2004, revision at April 1
st
, 2011
LIMITED WARRANTY - Subject to the terms and conditions
below, Malo Welding Products Ltd.(WELDKING® )
endeavors to provide high quality products and product
support to its customers and therefore backs up all of its new
products purchased from Malo Welding Products
Ltd.(WELDKING® ) or any authorized Malo Welding Products
Ltd.(WELDKING® ) distributor/service center after the
effective date of this limited warranty and is free of defects in
material and workmanship at the time it is shipped. THERE
ARE NO WARRANTIES WHICH EXTEND BEYOND THE
FACE OF THE MALO WELDING PRODUCTS
LTD.(WELDKING® ) WARRANTY. MALO WELDING
PRODUCTS LTD.(WELDKING® ) DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE
PRODUCTS, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR NONINFRINGEMENT. IN THE UNITED
STATES, SOME STATES DO NOT ALLOW THE
EXCLUSION OF THE IMPLIED WARRANTIES, SO THE
ABOVE EXCLUSION MAY NOT APPLY TO YOU.
Malo Welding Products Ltd.(WELDKING® ) shall honor
warranty claims on warranted equipment listed below in the
event of such a failure within the warranty time periods. All
warranty time periods start on the date that the equipment
was delivered to the original retail purchaser, or one year
after the equipment is sent to a North American distributor.
(1) 3 Years - Parts and Labor
Power Sources
Wire Feeders
(2) 90 Days - Parts (No Labor)
Guns
Remote Controls
Accessory Kits
Replacement Parts (No labor)
Malo Welding Products Ltd.(WELDKING® )'s limited
Warranty shall not apply to:
(1) Consumable components; such as contact tips, cutting
nozzles, contactors, brushes, slip rings, relays or parts that
fail due to normal wear.
(2) All limited warranties are void for, and Malo Welding
Products Ltd.(WeldKing® ) does not warrant in any way, any
product that evidences misapplication, improper installation,
abuse, lack of maintenance, negligence in use or care,
abnormal use, alteration of design, use of incompatible or
corrosive chemicals, and/or servicing, installation of parts, or
repairs by anyone other than Malo Welding Products
Ltd.(WELDKING® ) or a Malo Welding Products
Ltd.(WELDKING® ) authorized distributor or service center.
Malo Welding Products Ltd.(WELDKING® ) may make
changes in products it manufactures and markets at any time;
these changes are made without obligation to change, retrofit,
or upgrade any product previously sold or manufactured.
MALO WELDING PRODUCTS LTD.(WELDKING®) 'S
PRODUCTS ARE FOR COMMERCIAL/INDUSTRIAL USE
AND PERSONS TRAINED AND EXPERIENCED IN THE
USE AND MAINTENANCE OF WELDING/PLASMA
CUTTING EQUIPMENT.
In the event of a warranty claim covered by this warranty, the
exclusive remedies shall be, at Malo Welding Products
Ltd.(WELDKING® )'s option: (1) repair; or (2) replacement; or,
where authorized in writing by Malo Welding Products
Ltd.(WELDKING® ), in appropriate cases, (3) the reasonable
cost of repair or replacement at an authorized service station;
or (4) payment of or credit for the purchase price (less
reasonable depreciation based upon actual use) upon return
of the goods at customer's risk and expense. No
compensation or reimbursement for transportation costs of
any kind will be allowed.
LIMITATION OF DAMAGES: THE REMEDY OF
REPLACEMENT OR REPAIR OF ANY DEFECTIVE GOODS
SHALL BE THE EXCLUSIVE REMEDY UNDER ANY
WARRANTY MADE BY MALO WELDING PRODUCTS
LTD.(WELDKING® ), WHETHER EXPRESS OR IMPLIED.
IN NO EVENT SHALL MALO WELDING PRODUCTS
LTD.(WELDKING® ) BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, PROPERTY DAMAGES, OR
PERSONAL INJURIES.
ANY EXPRESS WARRANTY NOT PROVIDED HEREIN
AND ANY IMPLIED WARRANTY, GUARANTY OR
REPRESENTATION AS TO PERFORMANCE, AND ANY
REMEDY FOR BREACH OF CONTRACT TORT OR ANY
OTHER LEGAL THEORY WHICH, BUT FOR THIS
PROVISION, MIGHT ARISE BY IMPLICATION,
OPERATION OF LAW, CUSTOM OF TRADE OR COURSE
OF DEALING, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE, WITH RESPECT TO ANY AND ALL
EQUIPMENT FURNISHED BY MALO WELDING
PRODUCTS LTD.(WELDKING® ), IS EXCLUDED AND
DISCLAIMED BY MALO WELDING PRODUCTS
LTD.(WELDKING® ).
If any provision or portion of this limited warranty policy is
found to be unenforceable, then the remaining provisions and
portions shall remain valid and enforceable. If any provision
or portion of this limited warranty policy is found to be limited
by law, then that provision or portion shall be construed to
make it effective within the bounds of law.
To obtain warranty service you must active your
product(s)'s warranty online at weldking.com or mail the
product registration card included in the package to Malo
Welding Products Ltd.(WELDKING® ) right after the
purchase. When there is a warranty issue, return the
defective welding machine or plasma cutting machine along
with proof of purchase to any WeldKing® Authorized
Warranty Depot. For the location of the nearest WeldKing®
Authorized Warranty depot or for service information in the
United States or Canada, please telephone toll free:
1-866-686-5088 or visit www. weldking.com (USA &
Canada).available, but may vary from province to province.
To Next Page
Loading...