Well st100 - Change Password for Lock; Initialize All the Setting

59
Setting
Phone can be initialized as manufacturer`s setting.
Setting initialization
1. At standby screen, select Menu → Setting → Setting initialization.
3. Password input screen will show up when user press menu button.
4. It gets activated after menu button gets pressed.
1. At standby screen, select Menu → Setting → Security setting → Change password.
To prevent disapproved user, security number for phone lock is used, and manufacture`s initial
password is 0000. To prevent disapproved user, please change the password.
Change password for phone lock
Enter the current password.
Enter the new password.
Re-enter the new password for verifying.
Reference