13
®
www.wellbox.com
Installation
Open the device by
pressing on the button
located in front.
Store the four
treatment heads in the
locations specifi cally
designed for that
purpose.
Each head’s dedicated
storage area is
indicated with
a pictogram.
To connect the hose to the machine, do as follows:
Insert the hose with the arrow
(in relief)
upwards, as indicated in the photo.
Then, you may connect the treatment head of your choice to the hose:
Choose one of the heads and then connect it to the
hose by lining up the arrows on the head and hose.
Repeat this process whenever you want to change
the treatment head.
After use, the hose is easily stored by coiling it in
the designed area, as shown in the picture.
The connecting hose may be joined on either
side. To disconnect it, pull carefully. Never turn or
force the connecting hose.
ensemble chapitres.indb 13 11/05/11 12:09
To Next Page
Loading...