www.wellbox.com
18
®
Lift heads
maintenance
To clean the Lift heads :
1 . Hold the Lift head or . Pick up the disassembly tool or , specifi c
for each head and insert it, on its tapered side, in the removable fl ap area until
you hear a “click”.
2 . Pull the tool out; the fl ap will come out as well.
3 . Dismount the fl ap from the tool and clean it carefully with a disposable
antiseptic wipe.
4 . Hold the tool on its fl at sides and mount the fl ap back on the tool.
5 . Insert both in the treatment head until the bottom of the head is reached.
For reasons of hygiene, the treatment heads must be cleaned
regularly before and after every use, with the heads disconnected, using
the supplied wipes or wipes soaked with an antiseptic, bactericidal and
fungicidal solution.
4.
3.
5.
2.
1.
ensemble chapitres.indb 18 11/05/11 12:10
To Next Page
Loading...