Wellion CALLA Light

To Next Page

To Previous Page

SETTING TIME AND DATE

NOTE:

• Anytime during set up, inserting a CALLA Test Strip will begin testing. The

changes you have done so far will be memorized by the meter.

Step 6 - Set Hour:

The current hour will ash. Use or buttons to select the

correct hour. Press the OK button to conrm your choice and to

advance to set the minutes.

Step 7 - Set Minute:

The current minute will ash. Use or buttons to select

the correct minutes. Press the OK button to conrm your choice

and the result of your date and time correction will ash as a

whole.

Press button to select the next function to setup or insert a

test strip and begin testing. You can also turn o the meter by

press and hold the OK button until the display screens shows

OFF.

Wellion CALLA Light - Page 15