Wellion CALLA Light User Manual

6
The Wellion CALLA Light Meter
THE WELLION CALLA LIGHT METER
Meter Display
Shows your blood glu-
cose test results, memo-
ry values, averages, and
other messages.
Test Strip Port
Insert test strip (see page 34)
to turn on the meter.
PC Connection Port
Plug in the data cable to
transmit result onto a PC
(Data cable and software
sold separately*).
OK Button
• Press and hold to
access the memo-
ry recall mode (see
page 43) or set up
mode (see page 11),
• View daily ave-
rage results when
in memory recall
mode (see page 43),
• Press and enter to
set up a specic
function in setup
mode (see page 11),
• Press and hold to
turn o the meter.
* The correct reading of your data can be ensured only with the original Wellion CALLA USB cable with Micro-USB connector.
Scroll Buttons
Press for scrolling through stored
test values and test averages (see
page 40) or numbers when set-
ting up the meter (see page 11).

Wellion CALLA Light Specifications

General

Test Time	5 seconds
Display	LCD
Blood Sample	Capillary Whole Blood
Measurement Range	20 to 600 mg/dL
Sample Size	0.6 µL
Memory Capacity	500 test results
Operating Temperature	10 to 40 °C
Operating Humidity	10 to 85% RH
Automatic Shut Off	After 2 minutes
Battery Type	CR2032
Automatic Coding	Automatic Coding