Wellion CALLA Light - Setting Alarms

23
SETTING ALARMS
Setting Alarms
Your Wellion CALLA Light Meter has 3 alarms that can be setup. The factory preset
is o for all alarms. Follow the steps below to setup up your alarms.
Material you will need:
Your Wellion CALLA Light Meter
Step 1:
Press or buttons in the Function menu until a bell icon
ashes.
Step 2:
Press the OK button and enter alarm setup.
Step 3:
The number 1 will ash. This indicates the rst alarm setup.
Press the OK button to enter setting up the rst alarm or press
or buttons to see additional options.