Wellion CALLA Light User Manual

8
The Wellion CALLA Blood Glucose Test Strip
The Wellion CALLA Test Strips are glucose specic, biosensor-based test strips that
can test glucose in capillary whole blood in as quickly as 6 seconds and require a
very little blood sample.
The No Code feature eliminates error in testing caused by incorrect coding or cali-
bration procedure. The test result is plasma referenced for easy comparison to lab
results and has under-ll detection to alert you when there is not enough blood
to perform a test, so you can be sure that each reading you get is an accurate and
meaningful result.
THE WELLION CALLA BLOOD GLUCOSE TEST STRIP
Contact Points
Insert this end into the
test strip port of the
meter.
Sampling End
Apply blood or con-
trol solution here
IMPORTANT:
• Be sure to use only the Wellion CALLA Blood Glucose Test Strips with the
Wellion CALLA Light Blood Glucose Meter. Other brands of test strips will not
work with the Meter.

Wellion CALLA Light Specifications

General

Test Time	5 seconds
Display	LCD
Blood Sample	Capillary Whole Blood
Measurement Range	20 to 600 mg/dL
Sample Size	0.6 µL
Memory Capacity	500 test results
Operating Temperature	10 to 40 °C
Operating Humidity	10 to 85% RH
Automatic Shut Off	After 2 minutes
Battery Type	CR2032
Automatic Coding	Automatic Coding