Wellion CALLA Light User Manual

43
CARING FOR THE METER
CARING FOR THE METER
Caring for your CALLA Light Meter is easy. Follow these simple guidelines to keep
your meter working properly.
Cleaning the Meter
• If the meter gets dirty, use a moist (NOT WET) lint-free cloth dampened with a
mild detergent.
• Do not get water inside the CALLA Light Meter. Never immerse the meter or
hold it under running water.
• Do not use glass or household cleaners on the meter.
• Do not try to clean the test strip holder.
Storage and Precautions
• Handle the Meter with care - severe shock, such as dropping the meter, could
damage the electronics.
• The meter and test strips are designed to be used within the temperature ranges
between 10°C to 40°C.

Wellion CALLA Light Specifications

General

Test Time	5 seconds
Display	LCD
Blood Sample	Capillary Whole Blood
Measurement Range	20 to 600 mg/dL
Sample Size	0.6 µL
Memory Capacity	500 test results
Operating Temperature	10 to 40 °C
Operating Humidity	10 to 85% RH
Automatic Shut Off	After 2 minutes
Battery Type	CR2032
Automatic Coding	Automatic Coding